- One coat coverage
- Easy application less mess
- Quick drying
- For rough, sawn wood
Less mess, easy application
Less Mess Fence Care has been specially developed to colour and protect sheds, fences and other rough sawn garden wood. Its special pigments ensure a rich colour and even coverage in just one coat.
How much do you need?
The 5L can covers up to 24m² with 1 coat or 8 fence panels.
The 6L can covers up to 30m² with 1 coat or 10 fence panels.
The 9L can covers up to 43m² with 1 coat or 15 fence panels.
Coverage can vary depending on application method and the condition and nature of the surface.
Stir thoroughly before use. Try a test area first to ensure that colour and adhesion are acceptable. Please note that the colour in the tub may be different to the final shade when dry. Brush on evenly along the grain. If a deeper colour is required, more coats can be applied. Allow 2-4 hours between coats under normal weather conditions. Product should only be used on rough sawn timber. Do not apply in temperatures below 5 degrees C, in damp conditions or if rain is likely before the product has dried. If using more than one can it is advisable to mix them together in a larger container or finish painting in a corner before starting a new can.
2-4 hours. Drying times can vary depending on the nature of the surface and the weather conditions.
Ensure surfaces to be painted are clean. Remove any mould, lichen, algae or moss using an appropriate fungicidal wash